carburetor -NARAKU- V.2 19mm PHBG with clamp fixation 24mm and manual choke molto in saldo

Carburetors with clamping flange (direct mount) are used wherever the carburetor is pushed directly onto the intake manifold without a rubber binder / rubber intake manifold and fastened with the clamp (flange) located on the carburetor. This may be necessary due to the factory equipped rigid intake manifold or various tuning intake manifolds. We generally specify the clamp connection of the carburetor in diameter. In addition, the carburetor port widths for clamp carburetors can be found at matching intake manifolds.
The tuning legend with clamp connection and 90 degree throttle cable connection. The carburetor is in 70cc scooter and moped tuning probably the most widely used tuning carburetor. This type carburetor is easy to tune and little susceptible. This tuning carburetor is available in different versions.
M5 type main jets are used as they are also used in Dellorto PHBG carburetors.
It is a tuning carburetor without vehicle specific allocation. For some models, add-on kits and adapters must be used.

Main jet 85 (5mm)
Auxiliary nozzle 55
Connection width intake manifold: 24mm
Connection width air filter: 32/38mm
Oil connection: no (mixture lubrication)
Choke: preparation for manual cableAI-translation